IPC-631

  • All I/O ports, buttons, LEDs, drive bays, AC inlet located on the front side
  • Supports ATX/Micro ATX MB with CPU TDP up to 120W
  • Built-in 500W single or redundant power supply
  • 350mm short depth
  • Optional module for dual hot-swap 2.5" drive drive bays for RAID 0, 1
  • PWM controlled smart fan generating low noise

ACP-4D00

  • Dual nodes, 350mm depth design for easy maintenance and space saving
  • Supports PICMG 1.3 or PCI half-sized slot SBC with Core i7 CPU
  • Supports 6-slot backplane, 3 available slots per node
  • Supports 2 front USB 3.0 ports each node
  • Supports 250W or 350W Flex ATX PSUs

 

ACP-4000

  • 4U rackmount chassis supports up to 15 add-on cards
  • Shock-resistant disk drive bay design holds up to three 5.25" and one 3.5"
    disk drives
  • Front-accessible USB and PS/2 interfaces for easy data transfer
  • Dual 12 cm / 85 CFM ball-bearing fans provide optimized and streamlined
    airflow
  • Front LED indicators and audible alarm notification for system fault detection
  • Lockable front door prevents unauthorized access
  • Supports 300 W single PS/2 and redundant ATX power supplies

 

ACP-4010

  • Supports either an ATX/CEB/EEB single/dual processors motherboard or a PICMG backplane with up to 15 slots
  • Supports one or two systems in a single chassis
  • Shock-resistant disk drive bay design holds up to two 5.25" and two 3.5" disk drives
  • LED indicators and alarm notification for system fault detection and network connection
  • Low noise system fans with fan speed control
  • Built-in Intelligent System Module enables whole system fan control and remote manageability
 

ACP-4020

  • Compact 4U rackmount chassis, with only 348mm depth
  • Supports 14-slot BP for half-size SBC or ATX/MicroATX motherboard
  • Shock-resistant disk drive bay holds one internal 2.5", and two front-accessible 3.5" drives, plus one slim optical disk drive. Optionally, the two front-accessible 3.5" slots may be converted to two or even four 2.5" mobile SATA HDD trays by using optional part IDT-3120E
  • Supports 80plus single power supply
  • Front-accessible system fan without opening top cover for easy maintenance
  • LED indicators and audible alarm notification for system fault detection
  • Smart fan speed control for system fans
  • Remote management (with SUSIAccess 2.1)
 

ACP-4320

  • Supports either an ATX motherboard or a PICMG backplane with up to15 slots
  • Support dual SAS/SATA hot-swap HDD trays
  • LED indicators and alarm notification for system fault detection
  • Low noise system fans
  • Built-in Intelligent System Module enabling whole system fan control and remote manageability
 

ACP-4340

  • Supports a PICMG backplane with up to 15 slots or an ATX/Micro-ATX motherboard
  • Shock-resistant disk drive bay holds four hot-swap 3.5" and 2.5" SAS/SATA disk trays, one slim optical disk drive, and one 2.5" internal drive
  • Equipped with dual front USB 3.0 ports
  • Supports 80plus single and redundant power supply
  • Front-accessible system fan without opening top cover for easy maintenance
  • LED indicators and audible alarm notification for system fault detection
  • Smart fan speed control for system fans
  • Remote management (with SUSIAccess 2.1)
 

ACP-4360

  • Supports up to 6 SAS/SATA HDDs, which can be hot-swappable if a SATA RAID card is used
  • Supports either an ATX motherboard or a PICMG backplane up to 15 slots
  • Supports one slim optical disk drive and one 3.5" FDD or internal HDD
  • LED indicators for LAN connectivity and alarm notification for redundant power supply, HDD activity, system fan and in-chassis temperature
  • Reusable, front-accessible filters for easy maintenance

IPC-610-F

  • 4U rackmount chassis supports up to 15 cards
  • Shock-resistant disk drive bay design holds up to three 5.25" and two 3.5" (one front-accessible & one internal) disk drives
  • Special hold-down clamp design with rubber cushions protects the cards from shock and vibration
  • Power and HDD activity notification improves system availability
  • Front-accessible air filter for easy system maintenance
  • Lockable front door prevents unauthorized access
  • 300 W / 400 W AC and 300 W DC ATX power supply options

IPC-610-H

  • 4U rackmount chassis supports up to 15 add-on cards
  • Shock-resistant disk drive bay design holds up to three 5.25" and one 3.5" disk drives
  • Front accessible USB & PS/2 interfaces for easy data transfer
  • Dual front-accessible filtered cooling fans provide optimized and streamlined airflow
  • Front LEDs indicate power status, and HDD activity
  • Lockable front door prevents unauthorized access
  • Supports single PS/2 and redundant ATX power supplies
 

IPC-610-L

  • Supports an ATX motherboard or a backplane with up to 15 slots
  • Shock-resistant disk drive bay design holds up to three 5.25" and one 3.5" disk drives
  • Special hold-down clamp design with rubber cushions protects the cards from shocks and vibrations
  • Power and HDD activity notification improves system availability
  • Front-accessible air filter for easy system maintenance
  • Lockable front door prevents unauthorized access
  • Flexible mechanical design supports both 300 W single PS/2 and redundant ATX power supply

IPC-611

  • Supports an ATX motherboard or a backplane with up to 15 slots
  • Shock-resistant disk drive bay design holds up to three 5.25" and one 3.5" disk drives
  • Special hold-down clamp design with rubber cushions protects the cards from shocks and vibrations
  • Power and HDD activity notification improves system availability
  • Front-accessible air filter for easy system maintenance
  • Lockable front door prevents unauthorized access
  • Flexible mechanical design supports both 300 W single PS/2 and redundant ATX power supply

IPC-619

  • Space-saving 4U rackmount chassis, with only 429 mm depth
  • Supports either ATX/MicroATX motherboards or backplane up to 15 slots
  • Shock-resistant drive bay design supports up to two 5.25" and one 3.5" disk drives
  • Versatile 250W/300W/400W power supply options

IPC-623

  • 4U rackmount chassis supports up to 4 multi-systems
  • Front-accessible redundant power supply
  • Shockproof disk drive bay design can hold up to three front-accessible 5.25" and one 3.5" disk drives, and one internal 3.5" HDD
  • Three 12 cm / 114 CFM ball-bearing cooling fans
  • Front LEDs and audible alarm notifications for system power status, fan operation, HDD status, and in-chassis temperature monitoring
  • Dual top cover designed for easy maintenance
  • Five easily replaceable air filters provide good airflow
  • Redundant power supplies are all with dual AC inputs

IPC-510

  • The most cost-effective rackmount chassis
  • Supports 250/300 W ATX PFC PS/2 power supply
  • Easy to install front-accessible drive bays to hold three 5.25" and two 3.5" drives (one front-accessible & one internal)
  • Front-accessible USB & PS/2 interfaces
  • Designed to withstand environmental extremes, such as shock, vibration and high temperature

HPC-7442

  • Supports EATX/ATX motherboard
  • Shock-resistant disk drive bay provides four hot-swap 3.5" or 2.5" SAS/SATA disk trays, one slim optical disk drive, and one 3.5" internal drive
  • With optional storage upgrade kit installed, system equipped up to eight hot-swap HDD trays for higher storage capacity requirement
  • Supports 80plus single and redundant power supply
  • Front-accessible system fan without opening top cover for easy maintenance
  • LED indicators and alarm notification for system fault detection
  • Built-in Intelligent System Module enabling whole system fan control and remote manageability
 

Sit Control, consulting and providing industrial automation